About EJEAS-New Journal

About EURAS Journal of Engineering and Applied Sciences – EJEAS

Focus and Scope

EURAS Journal of Engineering and Applied Sciences – EJEAS aims that creating a source for academics and scientists who are doing research in the engineering and applied sciences that feature formally well-written quality works. In addition, EJEAS also aims that creating a source that will contribute and help develop the fields of study. EJEAS only accepts articles from engineering and applied science. Accordingly, EJEAS’s intentions are on publishing articles and scientific works which are guided by a scientific quality sensibility. In this context, EJEAS is qualified as an “international peer-reviewed journal”. It is a peer-reviewed international journal published two times a year.

EURAS Journal of Engineering and Applied Sciences – EJEAS, which is based on engineering and applied sciences; artificial intelligence, cyber security, environmental sciences, food and food safety, bio-technology, material science and composites, nano technology, energy technologies, electronics, robotics, thermal sciences, earthquakes – structures – foundation and earth sciences studies are accepted and published.

EURAS Journal of Engineering and Applied Sciences – EJEAS is a refereed journal and publishes two times in a year as printed and electronically. Original theoretical and / or experimental investigations in various scientific research methods can be applied and accepted. The editorial board of Euras Journal of Engineering is authorized to accept or to decline articles upon the evaluation of national and international experts.

Publisher

EURAS-Eurasian Universities Union

Article Types

  1. Review: Evaluation and comparison studies on a particular subject.
  2. Research Article: Scientific studies which presents novelty researches and results.
  3. Theoretical Article: Scientific studies which are prepared on a theoretical level that will contribute to the related subject.

Peer Review Process

All submitted research articles are evaluated by referees. During this evaluation, EURAS Journal of Engineering and Applied Sciences – EJEAS prefers to follow the “Double-Blind Review” which means both the reviewers and authors cannot see their information on the manuscript file. All the papers are controlled academically with the TURNITIN or/and iThenticate program. The report must be not exceeded the rate of 20%.

Open Access Policy

EURAS Journal of Engineering and Applied Sciences – EJEAS adopted a policy of providing open access. This is an open access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author.

Publication Charge

No publication charge or article processing charge is required. All accepted manuscripts will be published free of cost.

Principles of Research and Publication Ethics

In scientific papers sent to EJEAS, the guidelines related to the Scientific Research and Publication Ethics of Higher Education Institutions, the recommendations of the International Committee of Medical Journal Editors and the International Standards for the Authors and Authors of the Committee should be taken into attention. Plagiarism, forgery in the data, misleading, repetition of publications, divisional publication and individuals who do not contribute to the research are among the authors are unacceptable practices within the ethical rules. Legal actions will be taken in case of any ethical irregularity related to this and similar practices.

a) Plagiarism: Placing the original ideas, methods, data, or works of others, partly or completely, without making reference to the scientific rules, is dealt with in the context of plagiarism. In order to avoid plagiarism, the authors should refer to the scientific rules in a manner that is appropriate and should pay attention to the references of all scientific papers in their research.

b) Forgery of Data: The use of data that does not exist or is modified in scientific research is data in the scope of forgery. Authors should analyze their data in accordance with ethical rules and without exposing them to a change in validity and reliability during the process.

c) Detortion: Changing the records or data obtained from the study, showing the devices or materials that are not used in the research as used, changing or shaping the research results according to the interests of the people and organizations that are supported are considered within the scope of distortion. The authors should be honest, objective and transparent in the information they provide in relation to the research process. They should avoid violating the rules of ethics.

d) Repetition: Presenting the same publication as separate publications without referring to the previous publications is considered within the scope of repetition of publications. The responsibility for the publication of the publications submitted for evaluation in another place or in the evaluation process belongs to the authors. The authors should refrain from repeating the original and original research and they should pay attention to submit their original and original research.

e) Divisional Publication: The results of a research are discussed in the scope of dissemination and disseminating the results of the research in a way that disrupts the integrity of the research and disseminating it in more than one way, and publishing these publications as separate publications. The authors should consider the integrity of the research and avoid the divisions that will affect the results.

f) Authorship: The inclusion of people who do not contribute to the research or not to include the people who have contributed is considered within the scope of unfair writing. All authors should have contributed sufficiently to the planning, design, data collection, analysis, and evaluation, preparation of the research and finalization of the research.

Ethics Committee Approval

“Ethics Committee Approval” is required for the following researches. An approved “Ethics Committee Approval” must be obtained from the institution where the author of the article is located. The researches requiring the Ethics Committee’s approval are as follows:

– Any researches carried out with qualitative or quantitative approaches that require data collection from participants using survey, interview, focus group work, observation, experiment, interview techniques,
– Use of humans and animals (including material / data) for experimental or other scientific purposes,
– Clinical researches on humans,
– Researches on animals,
– Retrospective studies in accordance with the law of protection of personal data,
Also;
– Stating that the “informed consent form” was taken in the case reports,
– Obtaining and specifying the permission of the owners for the use of scale, questionnaire and photos belonging to others,
– Stating that copyright regulations are obeyed for the ideas and works of art used.

“Ethics Committee Permission” should be stated in these articles. The articles should include the statement that Research and Publication Ethics are complied with.

Copyright

Copyright aims to protect the specific way the article has been written to describe a scientific research in detail. It is claimed that this is necessary in order to protect author’s rights, and to regulate permissions for reprints or other use of the published research. EJEAS have a copyright form which is required authors to sign over all of the rights when their article is ready for publication. All site content, except where otherwise noted, is licensed under a Creative Common Attribution License. (CC-BY-NC 4.0)

The author gives his rights to the journal by signing the copyright transfer form. The submitted papers are assumed to contain no proprietary material unprotected by patent or patent application; responsibility for technical content and for protection of proprietary material rests solely with the author(s) and their organizations and is not the responsibility of the EJEAS or its Editorial Staff. The main (first/corresponding) author is responsible for ensuring that the article has been seen and approved by all the other authors. It is the responsibility of the author to obtain all necessary copyright release permissions for the use of any copyrighted materials in the manuscript prior to the submission.

What are my rights as author?

It is important to check the policy for the journal to which you are submitting or publishing to establish your rights as Author. EJEAS’s standard policies allow the following re-use rights:

The journal does not allow the author(s) to hold the copyright without restrictions. The journal does not allow the author(s) to obtain publishing rights without restrictions. You may not do whatever you wish with the version of the article you submitted to the journal. Once the article has been accepted for publication, you may not post the accepted version of the article on your own personal website, your department’s website or the repository of your institution without any restrictions.

You may not post the accepted version of the article in any repository other than those listed above (i.e. you may not deposit in the repository of another institution or a subject-matter repository) until 12 months after publication of the article in the journal.

You may not post the published article on a website or in a repository without permission from EJEAS.

Call for Papers

EJEAS will bring together academics and professionals coming from different disciplines to discuss their differing points of views on these questions related to “engineering and applied sciences”.

Main Topics of EJEAS

  • Artificial Intelligence
  • Cyber Security
  • Environmental Sciences
  • Food and food safety
  • Bio-technology
  • Material science and composites
  • Nano technology
  • Energy Technologies
  • Electronics
  • Robotics
  • Thermal Sciences
  • Earthquake – Structures – Foundation
  • Earth Sciences

Language of EJEAS

The language of the papers is English

Article Submission

Manuscripts should be sent to [email protected]

Submission Instructions

The scope of EURAS Journal of Engineering and Applied Sciences – EJEAS covers the novel scientific papers about Artificial Intelligence, Cyber Security, Environmental Sciences, Food and Food Safety, Bio-technology, Material Science and Composites, Nano Technology, Energy Technologies, Electronics, Robotics, Thermal Sciences, Earthquake – Structures – Foundation, Earth Sciences and related topics of the above subjects. EJEAS is an international periodical published two times a year. Manuscripts reporting on original theoretical and/or experimental work and tutorial expositions of permanent reference value are welcome. EJEAS Editorial Board is authorized to accept/reject the manuscripts based on the evaluation of international experts. The papers should be written in English. The manuscript should be sent in electronic submission via EJEAS paper submission system of web address: https://euras-edu.org/

Submission Instructions of Manuscripts

Page Design: Text body area is (195mm x 275mm). 30 mm margin from top, 20 mm from down and 25 mm margin should be left on right/left sides.

Title should be in 16 pt. bold, capital letters with Times New Roman font in Microsoft Word format. Authors’ names, affiliations, e-mail addresses should follow the title after double line spacing with authors’ names and surnames in lower case except first letters in 14 pt, the rest is 10 pt. italic.

Abstract should not exceed 200 words with the word “Abstract” in 10 pt. italic, bold, abstract text in 9 pt. italic, all in Times New Roman font in Microsoft Word format.

Key Words not exceeding 5 should be in bold.

Document Character: Subtitles should be in 10 pt. bold, capital letters and text body 10 pt. both with Times New Roman font in Microsoft Word format. The manuscripts should be written on a single column, be double spaced with single line spacing between paragraphs. The subtitle of the first section should start after a single space following the keywords, the other subtitles also with a single line space following the text, there should also be single line spacing between the previous text and the subtitle.

Conclusion: section should have a title written in 1o pt. bold, capital letters and the text in 10 pt. all in Times New Roman font in Microsoft Word format.

Reference numbers should be given in brackets as illustrated below:

Referencing books:

 [1] Özsu M., T, Valduriez, P., Principles of Distributed Database Systems, Prentice Hall, New Jersey, 128-136,1991.

Referencing papers:[2] G. Altay, O. N., Ucan, “Heuristic Construction of High-Rate Linear Block Codes,” International Journal of Electronics and Communications (AEU), vol. 60, pp.663-666, 2006.

Page number is to be placed at the top left corner of each page with pencil.

Length of the Manuscript should not exceed 20 pages excluding Figures and Tables.

INSTRUCTIONS ABOUT THE ACCEPTED MANUSCRIPTS:

Page Design: Text body area is (195mm x 275mm). 30 mm margin from top, 20 mm from down and 25 mm margins should be left on right/left sides.

Title should be in 16 pt. bold, capital letters with Times New Roman font in Microsoft Word format. Authors’ names, affiliations, e-mail addresses should follow the title after double line spacing with authors’ names in lower case and surnames in capital letter in 14 pt. the rest in 10 pt. in the same format.

Abstract should not exceed 200 words with the word “Abstract” in 12 pt. italic, bold, abstract text in 9 pt. italic, all in Times New Roman font in Microsoft Word format.

Key Words not exceeding 5 should be in 9 pt. bold.

Document Character: Subtitles should be in 10 pt. bold, capital letters and text body 10 pt. both with Times New Roman font in Microsoft Word format. The manuscripts should be written on two columns, be single spaced with single line spacing between paragraphs. The subtitle of the first section should start after a single space following the keywords, the other subtitles also with a single line space following the text, there should also be single line spacing between the previous text and the subtitle.

Sections: Formulas should be numbered sequentially. Referring to formulas should be as Eqn (.). Figures and Tables should be placed into the text body and captions for both should be 10 pt. Table numbers and captions should be placed before the Table. If necessary, both columns may be used for large Figures and Tables.

Conclusion section should have a title written in 12 pt. bold, capital letters and the text in 10 pt. all in Times New Roman font in Microsoft Word format. Conclusion should not be a version of the Abstract.

Reference numbers should be given in brackets as illustrated below:

Referencing books:

 [1] Özsu M., T, Valduriez, P., Principles of Distributed Database Systems, Prentice Hall, New Jersey, 128-136,1991.

Referencing papers:

 [2] G. Altay, O. N., Ucan, “Heuristic Construction of High-Rate Linear Block Codes,” International Journal of Electronics and Communications (AEU), vol. 60, pp.663-666, 2006.

Short Biography of the authors should follow references after a single line space, names in 9 pt. surnames in 9 pt. and the text in 9 pt. The text should not exceed 100 words.